How Do I Know if My Pool is Leaking

How Do I Know if My Pool is Leaking?

Do you suspect a leak in your pool? If so, you could call in a pool expert for an inspection to ensure your investment is protected, and that there aren’t any underlying issues or something more severe like a cracked underground pipe. Here are some telltale steps to follow to help answer your question, how do I know if my pool is leaking?

Consistent Changes with Water Level

The number one sign that indicates a potential leak is noticeable water loss. This will naturally happen due to evaporation, varying with wind conditions, humidity, heat and splashing when getting in or out of the pool. However, consistent changes with the water level can also pinpoint a leak. To determine the difference, you can use an online evaporation calculator which will show you the average amount of water loss based on the data you input. If you have a lower level than the number produces, it could highlight a leak.

Also, if you use an automatic fill device in your pool to maintain a consistent water level and it’s kicking in more frequently, this can be an indication too.

Unusually High Water Bills

A sudden spike in your monthly bills could also be a sign that there’s something wrong with your pool. If you notice higher than normal water bills, it’s a good time to investigate.

Cracks in the Tiling

If you’re concerned that your pool is leaking, look for gaps around fittings, cracked flanges, cracks in the skimmer, and holes in the liner. If you have a concrete pool, you should also look for cracks in the concrete or loose plaster.

Uneven Grass Growth Around Pool

When water leaks from the pool into the ground, it can create erosion, gradually softening the surrounding areas throughout the landscape. Take note of any mushy or unusually soft spots along the lawn or any nearby areas close to the pool. Any wet spots in the yard that are out of place and near the poolscape should be looked at.

Dripping at a Fitting, Water Leaking Out the Backwash/Waste Line or Puddles

Another sign of a leak is when puddles of water surround the pump or if there are white calcium deposits on equipment. This can be a serious problem if it’s not addressed, which is why we recommend having your pool equipment thoroughly inspected and repaired as soon as possible.

Algae and Mildew Growth

When your pool’s water level needs frequent top-ups, this can offset the balance of chemicals that are needed to prevent certain bacteria growth from happening. Algae growth or mildew can occur in this case which can indicate that there’s more untreated water in the pool than there should be. If you’ve been filling up the pool and notice more algae as a result, it’s a good time to look for a potential leak.

Gurgling Sounds and Dirty Water

Is your pool making gurgling sounds? Or maybe you’re seeing more dirt in the water and aren’t sure where it’s coming from. This can be caused by a leak in the plumbing, where dirt and air get into the system and creates weird sounds or the presence of dirt.

Some leaks can be easy to identify, especially if it’s a direct cause of equipment that you can see, such as the pump. But in other situations, it may not be as simple to source. If you’re unsure how to determine if your pool is leaking, give us a call at Benson Pools. We’ll send out one of our pool technicians to inspect the pool thoroughly to get to the bottom of the problem and repair it if necessary.

8 Ways to Save Money When Building a Pool

8 Ways to Save Money When Building a Pool

Thinking of having a pool installed? Before you do, it’s a good idea to consider your budget. Swimming pools can range in price anywhere from $10,000 to upwards of $100,000. If you’re planning to invest in a pool this year but want to keep it within your budget, follow these 8 ways to save money when building a pool.

Stick to Your Budget

It can be easy to surpass your budget when building a pool. When you’re wondering how to save money building a pool, it’s key that you keep your budget in mind. With all the add-ons and options available today, it can be tempting to stretch out your budget to get more features. But if you start accepting every upgrade, you’ll quickly run out of money before the pool installation is finished. It’s never worth going into debt to build a pool, so make sure you create a detailed budget and stick to it.

Consider Going Above Ground

The price difference between an inground pool and above ground is significant. If you’re looking for a way to save money on the installation fee, opt for an above-ground design. You can still get the same swimming area as an inground pool. Plus, it’s safer if you have kids thanks to the uniform depth. Another benefit of going above ground is that it can be installed right off the back deck, saving you from patio installation costs.

Trim Down the Size

You don’t need an Olympic-sized pool to get an enjoyable swimming experience. Smaller designs will provide you with all the room you need to swim without the additional costs of installing and running the pool. Bigger pools have more materials and bigger pumps that push up the price. They are also more expensive to install, run, maintain and service. Smaller designs can save you thousands of dollars over the lifetime of the pool.

Keep It Simple

The more features your pool has, the more expensive it will be. Specialty shapes, steps, waterfalls and other water features can drive up the cost. If you’re on a tight budget, you should try to keep the design as simple as possible to save more money. Going with a classic rectangle, ladder only entry and limited add-ons can help you keep the material and installation costs down.

Choose a Less Expensive Material

The material you choose will also greatly impact the cost. If you want to save money when building a pool, go with vinyl over concrete and fibreglass. This one decision can help you to save big.

Work with Leak Detection Experts

When your pool is leaking, it isn’t only a nuisance, it also costs you money. And when you have a leak in your pool, tackling it on your own is no walk in the park. A leaking pool will cost you water, heat, chemicals, and more. Luckily, you can avoid these unnecessary costs by working with the experts. Our team at Benson Pools is happy to determine whether or not your pool is leaking and provide quick, cost-effective solutions.

Shop Around

Rates and services can differ depending on the pool company you choose. That’s why it’s important to shop around and compare the available pool companies in your area to ensure you are getting the best rate and service. It’s a good idea to narrow down your search to three companies to contact and ask for bids. This should give you more insight into how the costs are broken down and the services that will be included. You can also use these bids to try to negotiate a lower rate from your preferred choice.

Choose a Level Area

It’s no secret that there are several perks of installing an inground pool.. Placing a pool on a sloped area can push up the installation and landscaping costs. Not only will you pay more to excavate the area but also to flatten it out for easy pool installation. To save money when building a pool, always select a flat level area to build the pool when possible.

Benson Pools has you covered for all of your pool needs in Ottawa and will be happy to show you how to save money building a pool. Our team of pool experts will work closely with you to pick out the perfect size, shape and features so you can get the poolscape you want, at a price you can afford. Contact us today to learn more.

Picking the Best Pool for Your Backyard

Picking the Best Pool for Your Backyard

Whether you’re looking to create a backyard oasis for the ultimate relaxation spot or want to have a fun haven at home where the whole family can spend quality time together – we can help make that happen. But picking the best pool for your backyard isn’t as easy as it may seem, especially for those working with smaller spaces or uneven terrain. When it comes to pool installation, there are several details to consider, and more often than not, your outdoor space may decide for you what’s possible and what’s not. At Benson Pools, our pool experts will guide you in choosing the right fit for your home, lifestyle and budget. In the meantime, here are some things to consider when it comes to the different pool options available to you and determining what might be ideal for your backyard.

Inground Pools

The perks of installing an inground pool are endless. Inground pools give you the most variety for tailoring the design, which makes them suitable for many unique backyard spaces, including those with smaller square footage. Inground pools these days can be customized into almost any shape and size, giving homeowners the ultimate freedom and flexibility with the design. There are also plenty of options when it comes to the details such as the colour of tiles and plaster. Since these pools are installed within the ground and constructed with high-grade concrete, they are more durable and will last longer in comparison to above-ground or semi-above ground pools.

This type of pool is undeniably the most luxurious, creating a truly eye-catching, focal feature that makes any backyard look like a 5-star hotel. Though inground pools will cost the most, they are the only feasible option for those who need a customized shape and size.

Semi-Above Ground Pools

For those who are more budget-conscious, a semi-above ground pool might be a more suitable choice. These pool structures are submerged approximately halfway into the ground and halfway above it. This is ideal for those who may have restrictions or underlying structures that prevent the necessary depth of an inground pool. If your yard does have a noticeable grade with a severe slope, this is the best solution for you. The same goes for backyards that have a rockier soil composition. While semi-above ground pools won’t last as long as inground pools, they can still carry a 10-20 year lifespan. They also require less labour and time to install.


Of course, your budget will play a major role when navigating your options. Inground pools can cost $35,000 to $50,000 and upwards. A semi-inground will range from $16,000 to $22,000 on average.


In addition to your budget and terrain, think about who the pool is primarily for. Is it for adults to lounge and cool off on a hot day? Or is it for the kids to have fun and splash around? Do you want to be able to get in some laps for exercise? Answering these questions will help to determine the best style and shape of the pool based on your needs and lifestyle.

Extra Features

Pools serve many different purposes. Even when they’re not directly being used, they can still create a mesmerizing ambience and setting that you can enjoy. When discussing your design, consider any extra features that will enhance your enjoyment, such as diving boards, waterfalls, fountains, LED lights, fire bowls and more.

Backyard Landscaping

The pool shouldn’t be a solo feature that stands out like a sore thumb. It should work well with the surrounding landscape, creating a seamless and stunning outdoor space. Think of the type of theme and layout you want so you can work with your pool experts to create a design that you will love and use even years from now.

There are a myriad of factors to consider when picking the right pool for your backyard. From the soil composition to the size, shape, slope, depth and additional features available – they can all impact your choice. When you’re ready to get the ball rolling on your new pool, contact us at Benson Pools. Our team of experts will walk you through it all to ensure you get the pool design that works for your yard, budget and needs. Contact us today to get the backyard transformation you’ve been dreaming of.